3.6.14

Steps In Mobile Home Skirting

By Marci Glover


Manufactured houses are normally placed on blocks which are then rested on a concrete foundation. This usually results in a space between the concrete slab and the house floor. In order to seal the gap created in-between, mobile home skirting is in most cases done. In some instances they are also termed as trailer skirting. Their main use is to create a barrier between the two surfaces.

Skirting is important if you want to decorate your mobile home. The quality of the outlook is however highly dependent on your budget. Nevertheless, besides giving the house good looks, the process also serves to cover the structural elements of the home. In addition, it helps in regulating the temperatures during summer and winter.

There are various types of materials that can be used for trailer skirting available in the market today. The choice of one will however be determined with what you have planned to spend. It is also of importance to note that the choice of a material you make determines the appearance of your. There are also some materials that will need the services of a professional in order to be fitted and those that can simply be installed by anyone.

The first step before embarking on any project of this kind is cost calculation. To do this, you need to calculate the length of the linear footage of the house. This is done by summing up both the width and length measurements of all four sides of the building. The total measurement you get is the key determinant of the cost.

After the above step, calculate the height in feet from the ground to the level you want the skirting to reach using a tape measure. Repeat this for all the four corners of the house. Thereafter, get the measurement from the middle point of both two sides of the trailer. Run an average of the six measurements to tabulate an average figure which will then be used as the height.

The total cost of the project will highly be determined by the choice materials to be used. Vinyl can be a good choice as it is pocket friendly and attractive. Reil rock panels are also an option for this. They are made out of tough plastic but look exactly as stone. The advantage they have is that they are relatively cheap and their installation process is quite easy. Faux rock, which is made out of polyurethane, is mainly used when the aim is to maintain stable temperatures beneath the house. Other skirting materials that can be considered for this job are; bricks, ply wood, cider block and metal.

Once you are done with cost evaluation and selecting the appropriate material for your house, acquire all the supplies needed for the job and transport them to the site. Using a saw blade, cut the panels of the material to be used to the exact size of the skirt. Place a wooden frame on the concrete and screw it to the ground. If need be, you can as well place a frame on the base of the house too. Using a screw drill place the boards to cover the gap and screw them to the wooden frames.

As seen above, trailer skirting is important if you own one. You should however consult an expert if you are not in position to do the job alone. The Internet can be helpful if you want to find one within your area.




About the Author:



No comments:

Post a Comment

Comment Here